Request System Software Delete - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

request system software delete

Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
122
®
OS for EX Series Ethernet Switches, Release 10.3
request system software delete software-package
<force>
request system software delete software-package
<force>
<lcc number | scc>
request system software delete software-package
<force>
<lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
sfc
Remove a software package or bundle from the router or switch.
CAUTION: Before removing a software package or bundle, make sure that
you have already placed the new software package or bundle that you intend
to load onto the router or switch.
—Software package or bundle name. You can delete any or all of the
software-package
following software bundles or packages:
—(Optional) Junos base software suite
jbase
jcrypto —(Optional, in domestic version only) Junos security software
—(Optional) Junos online documentation file
jdocs
jkernel —(Optional) Junos kernel software suite
—(Optional) Junos Packet Forwarding Engine support
jpfe
—(Optional) Junos routing software suite
jroute
—(Optional) Junos base software
junos
force —(Optional) Ignore warnings and force removal of the software.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
remove an extension or upgrade package from a specific T640 router (or line-card
chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, remove
an extension or upgrade package from a specific T1600 router (or line-card chassis)
that is connected to the TX Matrix Plus router. Replace
through .
3
number with a value from
Copyright © 2010, Juniper Networks, Inc.
0