Juniper JUNOS OS 10.3 - SOFTWARE Manual page 214

Complete Software Guide for Junos
118
®
OS for EX Series Ethernet Switches, Release 10.3
—File Transfer Protocol.
ftp
Use
ftp://hostname/pathname/package-name
credentials, use
ftp://<username>:<password>@hostname/pathname/package-name
the system prompt you for the password, specify
password. If a password is required, and you do not specify the password or
prompt , an error message is displayed.
—Hypertext Transfer Protocol.
http
Use
http://hostname/pathname/package-name
credentials, use
http://<username>:<password>@hostname/pathname/package-name
password is required and you omit it, you are prompted for it.
—Secure copy (available only for Canada and U.S. version).
scp
Use scp://hostname/pathname/package-name
credentials, use
scp://<username>:<password>@hostname/pathname/package-name
NOTE:
The
pathname
directory on the remote system and not the root directory.
On a J Series Services Router, when you install the software from a
remote location, the package is removed at the earliest opportunity in
order to make room for the installation to be completed. If you copy
the software to a local directory on the router and then install the new
package, use the
the installation to be completed.
best-effort-load —(Optional) Activate a partial load and treat parsing errors as warnings
instead of errors.
—(Optional) Install software package or bundle, but do not restart software
delay-restart
processes.
force —(Optional) Force the addition of the software package or bundle (ignore warnings).
—(TX Matrix and TX Matrix Plus routers only) (Optional) In a routing matrix
lcc number
based on the TX Matrix router, install a software package or bundle on a T640 router
(or line-card chassis) that is connected to the TX Matrix router. In a routing matrix
based on the TX Matrix Plus router, install a software package or bundle on a T1600
router (or line-card chassis) that is connected to the TX Matrix Plus router. Replace
with a value from
number
—(TX Matrix routers only) (Optional) Install a software package or bundle on a Routing
scc
Engine on a TX Matrix router (or switch-card chassis).
. To specify authentication
in the protocol is the relative path to the user's home
option to achieve the same effect and allow
unlink
through .
0 3
Copyright © 2010, Juniper Networks, Inc.
. To have
in place of the
prompt
. To specify authentication
. If a
. To specify authentication
.