Request System Software Rollback - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
request system request system
software delete jdocs software delete jdocs
Copyright © 2010, Juniper Networks, Inc.
—(TX Matrix routers only) (Optional) Remove an extension or upgrade package from
scc
the TX Matrix router (or switch-card chassis).
sfc number —(TX Matrix Plus routers only) (Optional) Remove an extension or upgrade
package from the TX Matrix Plus router (or switch-fabric chassis). Replace number
with .
0
Before upgrading the software on the router or switch, when you have a known stable
system, issue the request system snapshot
the configuration, to the
/altroot
the software on the router or switch and are satisfied that the new packages are
successfully installed and running, issue the
to back up the new software to the
the
request system snapshot
software, because the running and backup copies of the software are identical.
maintenance
request system software add on page 117
request system software rollback on page 125
request system software validate on page 128
request system software delete jdocs on page 123
When you enter this command, you are provided feedback on the status of your request.
The following example displays the system software packages before and after the
package is deleted through the
user@host> show system software
Information for jbase:
Comment:
JUNOS Base OS Software Suite [7.2R1.7]
Information for jcrypto:
Comment:
JUNOS Crypto Software Suite [7.2R1.7]
Information for jdocs:
Comment:
JUNOS Online Documentation [7.2R1.7]
Information for jkernel:
Comment:
JUNOS Kernel Software Suite [7.2R1.7]
Chapter 10: Operational Mode Commands for Software Installation
command to back up the software, including
and file systems. After you have upgraded
/altconfig
request system snapshot
/altroot and /altconfig
command, you cannot return to the previous version of the
request system software delete
command again
file systems. After you run
jdocs
command:
123