Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1606

Complete Software Guide for Junos
Table 214: show vlans Output Fields (continued)
Field Name Field Description
IP address associated with a VLAN.
IP addresses
For MAC-based VLANs created either statically or dynamically, the MAC
Number of MAC
addresses associated with an interface.
entries
The secondary VLANs associated with a primary VLAN.
Secondary VLANs
The isolated VLANs associated with a primary VLAN.
Isolated VLANs
The community VLANs associated with a primary VLAN.
Community VLANs
VLAN counts:
VLANs summary
Total
Configured VLANs
settings.
Internal VLANs
configuration or protocol—for example, the
created when a trunk interface is not configured with native VLAN
membership.
Temporary VLANs
the system retains for a limited time after restart. Temporary VLANs are
converted into one of the other types of VLAN, or are removed from the system
if the current configuration does not require them.
Dot1q VLANs 802.1Q VLAN counts:
summary
Total
Tagged VLANs
Untagged VLANs
Private VLAN
(PVLANs):
Q-in-Q VLAN counts:
Dot1q Tunneled
VLANs summary
Total
Private VLAN
VLANs (PVLANs).
1510
®
OS for EX Series Ethernet Switches, Release 10.3
—Total number of VLANs on the switch.
—Number of VLANs that are based on user-configured
—Number of VLANs created by the system with no explicit
—Number of VLANs from the previous configuration that
—Total number of 802.1Q VLANs on the switch.
—Number of tagged 802.1Q VLANs.
—Number of untagged 802.1Q VLANs.
—Counts of the following kinds of 802.1Q private VLANs
—Number of primary forwarding private VLANs.
Primary VLANs
—Number of secondary transporting and forwarding
Community VLANs
private VLANs.
—Number of secondary receiving and forwarding private
Isolated VLANs
VLANs.
—Total number of Q-in-Q VLANs on the switch.
—Counts of primary, community, and isolated Q-in-Q private
VLAN and the VLAN
default
Copyright © 2010, Juniper Networks, Inc.
Level of Output
extensive
extensive
extensive
extensive
extensive
All levels
All levels
All levels