clear lldp port status
clear lldp port status
Use this command to return the port status to the default value of both (both transmitting and
processing received LLDPDUs are enabled).
Syntax
clear lldp port status port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example returns port
processing received LLDPDUs.
B3(rw)->clear lldp port status ge.1.1
clear lldp port trap
Use this command to return the port LLDP trap setting to the default value of disabled.
Syntax
clear lldp port trap port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example returns port
B3(rw)->clear lldp port trap ge.1.1
clear lldp port med-trap
Use this command to return the port LLDP‐MED trap setting to the default value of disabled.
4-30 Discovery Protocol Configuration
Specifies the port or range of ports to be affected.
.1.1 to the default state of enabled for both transmitting and
ge
Specifies the port or range of ports to be affected.
.1.1 to the default LLDP trap state of disabled.
ge