Configuring An Ssh User - 3Com 4500G Family Configuration Manual

To do...
Enter system view
Enter public key view
Enter public key code view
Configure a client public key
Return from public key code view
to public key view
Return from public key view to
system view
Importing a client public key from a public key file
Follow these steps to import a public key from a public key file:
To do...
Enter system view
Import the public key from a public
key file
For information about client side public key configuration and the relevant commands, refer to Public
Key Configuration in the Security Volume.

Configuring an SSH User

This configuration allows you to create an SSH user and specify the service type and authentication
mode.
Follow these steps to configure an SSH user and specify the service type and authentication mode:
To do...
Enter system view
Create an SSH
user, and
specify the
service type
and
authentication
mode
Use the command...
system-view
public-key peer keyname
public-key-code begin
Enter the content of the public key
public-key-code end
peer-public-key end
Use the command...
system-view
public-key peer keyname import
sshkey filename
system-view
ssh user username service-type stelnet
For Stelnet authentication-type { password | { any |
users password-publickey | publickey } assign
publickey keyname }
ssh user username service-type { all | sftp }
authentication-type { password | { any |
For all users or
password-publickey | publickey } assign
SFTP users
publickey keyname work-directory
directory-name }
—
—
—
Required
Spaces and carriage returns are
allowed between characters.
—
When you exit public key code
view, the system automatically
saves the public key.
—
—
Required
Use the command...
1-7
Remarks
Remarks
Remarks
—
Required
Use either
command.