System Disable-Cryptography; System Duplicate-Firmware; System Factory-Erase; System Find-Me - Digi IX20W-PR User Manual

Command line interface

system disable-cryptography

Erase the device's configuration and reboot into a limited mode with no cryptography available. The
device's shell will be accessible over Telnet (port 23) at IP address 192.168.210.1. To return the device
to normal operation, perform the configuration erase procedure with the device's ERASE button twice
consecutively.
Syntax
system disable-cryptography
Parameters
None

system duplicate-firmware

Duplicate the running firmware to the alternate partition so that the device will always boot the same
firmware version.
Syntax
system duplicate-firmware
Parameters
None

system factory-erase

Erase the device to restore to factory defaults. All configuration and automatically generated keys will
be erased.
Syntax
system factory-erase
Parameters
None

system find-me

Find Me function to flash LEDs on this device to help users locate the unit.
Syntax
system find-me <state>
Parameters
state: Find Me control to flash cellular-related LEDs.

system firmware ota check

Query the Digi firmware server for the latest device firmware version.
IX20 User Guide
Command line reference
1181