Ssh; System Backup; System Cloud Register - Digi IX20W-PR User Manual

Command line interface
mode: The type of speed test protocol to run. (Default: nuttcp)
output: The format of output to display the speed test results as. (Default: text)

ssh

Use SSH protocol to log into a remote server.
Syntax
ssh <host> <user> [port INTEGER] [command STRING]
Parameters
host: The hostname or IP address of the remote host.
user: The username to use when connecting to the remote host.
port: The SSH port to use to connect to the remote host. (Minimum: 1, Maximum: 65535, Default: 22)
command: The command that will be automatically executed once the SSH session to the remote
host is established.

system backup

Save the device's configuration to a file. Archives are full backups including generated SSH keys and
dynamic DHCP lease information. Command backups are a list of CLI commands required to build the
device's configuration.
Syntax
system backup [type <custom-defaults|cli-config|archive>] [path STRING]
[passphrase STRING] [remove <custom-defaults>]
Parameters
type: The type of backup file to create. Archives are full backups including generated SSH keys and
dynamic DHCP lease information. CLI configuration backups are a list of CLI commands used to build
the device's configuration. (Default: archive)
path: The file path to save the backup to. (Default: /var/log/)
passphrase: Encrypt the archive with a passphrase.
remove: Remove a backup file.

system cloud register

Register with Digi Remote Manager account.
Syntax
system cloud register <username> <password> [group STRING]
Parameters
username: Digi Remote Manager username.
password: Digi Remote Manager password.
group: Group to add device in Digi Remote Manager.
IX20 User Guide
Command line reference
1180