Chassis Physical Specifications For Ex3200 And Ex4200 Switches; Front Panel Of An Ex3200 Switch; Table 3: Physical Specifications Of The Ex3200 And Ex4200 Switch Chassis - Juniper EX3200 Series Complete Hardware Manual

Chassis Physical Specifications for EX3200 and EX4200 Switches

Table 3: Physical Specifications of the EX3200 and EX4200 Switch Chassis

Description
Chassis height
Chassis width
Chassis depth
Weight
Related Topics

Front Panel of an EX3200 Switch

Copyright © 2010, Juniper Networks, Inc.
Rear Panel of an EX4200 Switch on page 11
EX3200 and EX4200 Switches Hardware Overview on page 3
The EX3200 and EX4200 switch chassis is a rigid sheet-metal structure that houses the
hardware components. Table 3 on page 7 summarizes the physical specifications of
the EX3200 and EX4200 switch chassis.
Value
1.75 in. (4.45 cm)
17.25 in. (43.82 cm)
19 in. (48.2 cm) with mounting brackets attached
Without power supply installed—17 in. (43.18 cm)
With power supply installed:
320 W AC power supply or 190 W DC power supply installed—17 in. (43.18 cm)
600 W or 930 W AC power supply installed—19.25 in. (48.9 cm)
EX3200 switch with 1 power supply: 15–17 lb (6.8–7.7 kg)
EX4200 switch with 1 power supply: 16–18 lb (7.2–8.2 kg)
320 W AC power supply: 2.5 lb (1.1 kg)
600 W and 930 W AC power supplies: 3.1 lb (1.4 kg)
190 W DC power supply: 2.5 lb (1.1 kg)
Rack Requirements for EX3200 and EX4200 Switches on page 93
Cabinet Requirements for EX3200 and EX4200 Switches on page 94
Mounting an EX3200 or EX4200 Switch on page 120
Installing and Connecting an EX3200 or EX4200 Switch on page 117
Installing and Removing EX3200 and EX4200 Switch Hardware Components on
page 131
The front panel of an EX3200 switch consists of the following components:
10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for Power
over Ethernet (PoE)
Uplink module ports—SFP, SFP+, or XFP ports (The uplink module is an optional
feature.)
Chapter 1: EX3200 and EX4200 Switches Overview
7