............................................................................................................................................................................................................................................................

If present, remove and discard the extended front cover, see

and edging grommet (p.

Figure 2-12 Cover, fiber tray, and edging grommet

If present, remove and discard the existing shallow add-on fiber tray, see

Cover, fiber tray, and edging grommet (p.

upward and then pushing the whole tray upward.

Remove the existing edging grommet, see

grommet (p.

fibers/cables are routed thru this area to make removal possible, this step can be skipped

and the existing fiber tray can remain.

Alcatel-Lucent 1665 DMX R9.0

365-372-304R9.0 Issue 2

July 2010

NOTICE

Laser hazard

Be careful when touching fibers that are live and ensure the minimum bend

radius is met to prevent a service event.

2-27). It will not be reused on the shelf.

2-27), from the sideplates near each end of the fiber tray. If too many

Alcatel-Lucent 1665 DMX high capacity shelf deep add-on

fiber tray and 1-inch sideplate extension installation

Figure 2-12, Cover, fiber tray,

2-27), by rotating/bending the front of the tray

Figure 2-12, Cover, fiber tray, and edging

(optional)

Figure 2-12,

2 - 2 7

Table of Contents

Cover, Fiber Tray, And Edging Grommet - Alcatel-Lucent 1665 Installation Manual

Related Manuals for Alcatel-Lucent 1665

Related Content for Alcatel-Lucent 1665

Table of Contents