Alcatel-Lucent 1665 Installation Manual page 208

Software download and circuit pack installation
............................................................................................................................................................................................................................................................
Before you begin
Prior to performing this task, you must:
Obtain the work instructions for this task.
•
Complete the Circuit pack firmware version verification procedure to provision and
•
enable TCP/IP for the selected LAN port.
Complete the
•
Know which LAN port is being provisioned.
•
Know the IP addresses, host names and host types for the gateway hosts which will be
•
allowed access to the Alcatel-Lucent 1665 DMX TL1 TCP/IP GNE.
Be able to log in to a Alcatel-Lucent 1665 DMX WaveStar
•
the functions of the WaveStar
............................................................................................................................................................................................................................................................
5 - 1 8
"Provision/enable/disable TCP/IP on an IAO LAN port" (p.
®
CIT.
Provision/enable/disable the Alcatel-Lucent 1665 DMX as a
TL1 TCP/IP GNE
5-13).
®
CIT and be familiar with
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010