Alcatel-Lucent 1665 Installation Manual page 82

Physical installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
7
Attach one fiber radius control module to the bottom of each bracket, as shown:
........................................................................................................................................................................................................................
8
Position one of the brackets along the left side of shelf 1. Secure with three bracket
mounting screws.
........................................................................................................................................................................................................................
9
Repeat
........................................................................................................................................................................................................................
10
Locate three spools (848919221), one fiber radius control module (321-1B), one right
fiber spool bracket (848919221) and three M4 X 6 bracket mounting screws (901340059)
for each shelf being installed.
........................................................................................................................................................................................................................
11
For each spool, put a nylach fastener through the middle. Then insert a pin halfway
through.
Note:
the fastener and prevent it from being assembled to the bracket.
........................................................................................................................................................................................................................
12
Line up the nylach fastener in one of the spools with the large holes on the top arm of the
bracket.
........................................................................................................................................................................................................................
13
Spin the spool until the peg on its back fits into the smaller hole on the arm of the bracket.
This will keep the spool from spinning any further.
............................................................................................................................................................................................................................................................
2 - 2 2
Step 8 for all the other shelves being installed.
It is very important that the pin is not completely inserted. This will deform
Fiber management installation (optional)
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010