Circuit Pack Compatibility - Alcatel-Lucent 1665 Installation Manual

Powering and initial circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
15
At the BDFB/BDCBB either insert the fuse or put the circuit breaker, associated with the
"B" feed of the Alcatel-Lucent 1665 DMX high-capacity shelf in the ON position. Then
either remove the fuse or put the circuit breaker, associated with the "A" feed of the
Alcatel-Lucent 1665 DMX, in the OFF position.
........................................................................................................................................................................................................................
16
Verify the PWR B LED on the Alcatel-Lucent 1665 DMX high-capacity shelf is lighted
with only the "B" feed powered.
........................................................................................................................................................................................................................
17
At the BDFB either insert the fuse or put the circuit breaker, associated with the "A" feed
of the Alcatel-Lucent 1665 DMX high-capacity shelf in the ON position.
........................................................................................................................................................................................................................
18
Verify that the both the PWR A LED and PWR B LED on the Alcatel-Lucent 1665 DMX
high-capacity shelf user panel are lighted with both the "A" and "B" feeds powered.
........................................................................................................................................................................................................................
19
Verify that the fans are still running and are moving air.
........................................................................................................................................................................................................................
20
Check off the appropriate box in
E O
N D
........................................................................................................................................................

Circuit pack compatibility

Overview
Table 4-2, "R9.0 circuit pack compatibility" (p. 4-6)
compatible with R9.0 and their respective shelf locations (slots).
Note:
following configurations should be avoided:
Fan Unit
Fan Unit
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
S
F T E P S
If installing the 20 Amp Alcatel-Lucent 1665 DMX high-capacity shelf, the
LNW2 (2) LNW59
LNW2 (2) LNW82
Table I-3, Installation acceptance
lists all the circuit packs that are
(10)LNW170
(10)LNW170
Circuit pack compatibility
checklist.
4 - 5