Final Operations - Alcatel-Lucent 1665 Installation Manual

OC-3/12/48 ring setup and testing: integration procedures
........................................................................................................................................................................
................................................................................................................................................
10
Check off the appropriate box in
E O
N D
........................................................................................................................................................

Final operations

Description
The following procedure ensures that all test signals and cross-connects have been
removed and the Alcatel-Lucent 1665 DMX shelf is alarm free and ready for network
connection procedures.
Steps
................................................................................................................................................
1
Select Configuration > Cross-Connections...
................................................................................................................................................
2
Use the Cross-Connection Wizard to Delete leg(s) of an existing cross-connection
associated with CP main-1, Port 1.
................................................................................................................................................
3
Select Configuration > Update System... > Update All.
................................................................................................................................................
4
Verify that no alarm LEDs are lit and no FAULT LED is lit on any circuit pack.
If any alarm is present, see Alcatel-Lucent 1665 Data Multiplexer (DMX) Alarm Messages
and Trouble Clearing Guide, 365-372-302.
................................................................................................................................................
5
Check off the appropriate box in
E O
N D
........................................................................................................................................................
Clear PM registers
The following steps will clear all the performance monitoring registers:
................................................................................................................................................
1
Select Performance > Initiate PM Registers > Both.
........................................................................................................................................................................
8 - 1 4
S
F T E P S
S
F T E P S
Table I-3, Installation acceptance
Table I-3, Installation acceptance
Final operations
checklist.
checklist.
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010