Alcatel-Lucent 1665 Installation Manual page 319

WDMX setup and testing: integration procedures
........................................................................................................................................................................
Deleting the OCH cross-connection
................................................................................................................................................
1
Login to the Alcatel-Lucent 1665 DMX using the WaveStar
................................................................................................................................................
2
Retrieve OCH Cross-connections.
Select View > OCH Cross-connections from the System View
................................................................................................................................................
3
Click the "+" next to OMD5/8 circuit pack to expand the list.
Record the list of ports to be used when deleting OCH cross-connections. If there are more
than one OMD5/8 circuit packs installed, click on the "+" next to the others to document
the list of OCH cross-connection for the remaining circuit packs.
................................................................................................................................................
4
Delete OCH Cross-connections
Select Configuration > OCH Cross-connections from the System View
................................................................................................................................................
5
Select the Delete an existing OCH cross-connection radio button in the OCH Cross-
Connection Wizard. Click Next.
................................................................................................................................................
6
Click the "+" next to OMD5/8 circuit pack to expand the list
................................................................................................................................................
7
Highlight one of the OCH cross-connections from the list recorded in
Next.
................................................................................................................................................
8
Highlight All Legs and click Next, Finish, then Yes.
................................................................................................................................................
9
Repeat
................................................................................................................................................
10
End the OCH cross-connection Wizard session by clicking Close.
E O
N D
........................................................................................................................................................
........................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
Step 5 through Step 8
S
F T E P S
Removing provisioning and equipage from the LNW705 and
for all remaining OCH cross-connections recorded in
®
CIT.
Step 3 and click
LNW785
Step 3.
9 - 1 5