Wdmx Setup And Testing: Integration Procedures - Alcatel-Lucent 1665 Installation Manual

9 WDMX setup and testing:
integration procedures
Overview
Purpose
This chapter is used to verify WDMX connectivity between Alcatel-Lucent 1665 Data
Multiplexer (Alcatel-Lucent 1665 DMX) nodes. The chapter includes the LNW785 8
channel Optical Multiplexer Demultiplexer (OMD) and the LNW705 XM10G/8
Muxponder circuit packs. It is not intended to replace acceptance test procedures.
The testing performed in this procedure uses an OC-48 test set. If the OC48 PTM and test
sets are unavailable, other rates or signals can be substituted, i.e OC-3/-12 or GigE. If
additional provisioning procedures are desired, see Alcatel-Lucent 1665 Data Multiplexer
(DMX) User Operations Guide, 365-372-301 and 3Alcatel-Lucent 1665 Data Multiplexer
(DMX) Alarm Messages and Trouble Clearing Guide, 365-372-302 for detailed
troubleshooting procedures.
Contents
This chapter provides information on the following topics:
Turn-up and test the LNW785 8-channel OMD
Turn up and test the LNW705 muxponder
Integrating the LNW705 into the LNW785
Connecting the ring (Mains) to the WDMX
Removing provisioning and equipage from the LNW705 and LNW785
........................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
9-4
9-7
9-10
9-12
9-16
9 - 1