B Installing Fiber Connectors And Lbos - Alcatel-Lucent 1665 Installation Manual

B Installing fiber
connectors and LBOs
Overview
Purpose
This appendix provides procedures for installing and removing Line Build Out units
(LBOs) and fiber connectors onto input and output ports found on the Alcatel-Lucent 1665
Data Multiplexer (Alcatel-Lucent 1665 DMX) optical circuit packs.
Contents
This appendix provides information on the following topics:
LBOs
Fiber connections
Objectives
This appendix provides information to perform the following:
Install and remove LC-type LBOs onto and from LC-type ports.
•
Install and remove LC-type fiber connections.
•
Fiber cleaning
See Appendix A, "Fiber cleaning"
LBOs as they may be damaged by a cleaning attempt. Discard suspect LBOs and replace
with a new unit.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
for fiber cleaning information. Do not attempt to clean
B-2
B-4
B- 1