Alcatel-Lucent 1665 Installation Manual page 47

Part I: Physical installation
and powering
Overview
Purpose
Part I covers the physical mounting of the Alcatel-Lucent 1665 Data Multiplexer (Alcatel-
Lucent 1665 DMX) shelf, the running and connecting of power cables, interconnecting
cables, alarm cables, and as required, external timing and communication cables. This
section also covers initial circuit pack installation (not seated).
Contents
This section is organized into the following chapters:
Chapter 2, "Physical installation"
Chapter 3, "Cable and fiber installation"
Chapter 4, "Powering and initial circuit pack installation"
Note:
shelf since the fan unit is integral to the shelf itself. Check
1665 DMX high-capacity shelf backplane" (p. I-2)
Alcatel-Lucent 1665 DMX high-capacity shelf. If the shelf you are installing is NOT
equipped with the additional middle connectors (J20 - J27), see the Metropolis
Access Multiplexer (DMX) Release 5.0 Installation Manual. Installation details for the
Alcatel-Lucent 1665 DMX standard shelf are not included in this issue.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
The high-capacity shelf does not require the installation of an additional fan
Figure I-1, "Alcatel-Lucent
to determine if the shelf is a
®
DMX
I- 1