Lbo Software Settings - Alcatel-Lucent 1665 Installation Manual
Data multiplexer
Hide thumbs
Also See for 1665:
- Installation manual (432 pages) ,
- Brochure (8 pages) ,
- Installation manual (368 pages)
Table of Contents
Advertisement
Installation tests
............................................................................................................................................................................................................................................................
OC-48 (low-speed) testing
LED test
Additional optical tests (optional)
Tools, test equipment and accessories
The tools, test equipment and accessories necessary to perform the procedures in this
section are listed in
LBO software settings
Description
This section provides instructions for setting the software Line Build Out (LBO) for the
DS1, DS3/EC1 and TMUX cabling and requires that the SYSCTL, DS1, DS3/EC1 and/or
TMUX circuit packs be installed and that software has been downloaded.
Setting DS1 LBOs
If provisioning DS1 LBO settings for the DS1, circuit packs follow the procedure below
otherwise, skip to
........................................................................................................................................................................................................................
1
Log on to the Alcatel-Lucent 1665 DMX shelf using the CIT software as described in the
5,
"Use of WaveStar
........................................................................................................................................................................................................................
2
See the following table of cable lengths and LBO values. Determine the LBO value
corresponding to the DS1 cables installed.
............................................................................................................................................................................................................................................................
6 - 2
"Tools, test equipment, and accessories" (p.
Setting DS3/EC1 and TMUX LBOs (p.
®
CIT software" (p.
LBO value
Distance (feet)
20
0 - 133 (default)
40
134 - 267
60
268 - 420
80
421 - 533
100
534 - 655
6-3).
5-6).
LBO software settings
6-44
6-51
6-52
II-2).
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
Advertisement
Table of Contents
