Alcatel-Lucent 1665 Installation Manual page 205

Data multiplexer
Hide thumbs Also See for 1665:
Table of Contents

Advertisement

Software download and circuit pack installation
............................................................................................................................................................................................................................................................
3. Select Enable to enable the TCP/IP function, or Disable to disable the TCP/IP
function.
Note:
appears: Input, Data Not Valid, each IAO LAN Port must have a unique IP subnet
mask.
Scroll through the Port AID drop-down menu and identify the duplication, then assign
correct addresses as necessary.
Note:
command when requested, the system may reset and you will be logged off. Selecting
Disable allows you to stay logged on to the system to perform more provisioning. You
can then come back to this window and enable the TCP/IP function.
Note:
revert to January 1, 1970 (70-01-01) at midnight (00:00:00). If automatic
synchronization is unsuccessful from the network, the date and time must be reset
manually.
........................................................................................................................................................................................................................
6
Click Apply at the bottom of the window to make your changes.
Result:
........................................................................................................................................................................................................................
7
Click Yes to execute the command.
Result:
applied, the system resets, and you are logged off the system. If you made changes and
disabled the TCP/IP function, the changes are applied and you are still logged on to the
system.
........................................................................................................................................................................................................................
8
If the TCP/IP function was enabled and the system reset, provision the TCP/IP Gateway
using
"Provision/enable/disable the Alcatel-Lucent 1665 DMX as a TL1 TCP/IP GNE"
(p. 5-17)
........................................................................................................................................................................................................................
9
Click Close when you want to exit the window if you are still logged into the system.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
If you enter duplicate IP addresses and/or IP subnet addresses, a warning
If you select Enable and click OK to apply any changes, then execute the
Following a Alcatel-Lucent 1665 DMX system reset, the date and time may
A warning window opens and asks if you want to execute this command.
If you made changes and also enabled the TCP/IP function, the changes are
to complete the TCP/IP provisioning, otherwise continue with Step 9.
Provision/enable/disable TCP/IP on an IAO LAN port
5 - 1 5

Advertisement

Table of Contents
loading

Table of Contents