Alcatel-Lucent 1665 Installation Manual page 123

Cable and fiber installation
............................................................................................................................................................................................................................................................
Figure 3-8 10/100BaseT cable installation
........................................................................................................................................................................................................................
3
Route the cables along the backplane and out of the bay to the 110/RJ45 punch down
block. Route the cables in the same manner as DS3/EC1 cables. See
"DS3/EC1 and TMUX cable routing" (p.
........................................................................................................................................................................................................................
4
Route the cables along the cable rack and into the terminating bay.
........................................................................................................................................................................................................................
5
Cut cable to length and punch down cable to the 110 block. See
ethernet connections" (p. 3-35)
:
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
IN
IN
OUT
OUT
NOTICE
The LNW66 and LNW74 10/100BaseT-Ethernet packs do not have lightning
protection for the metallic connections. Therefore it is necessary to use a
lightning-protected patch panel, such as the Black Box CAT5 protected patch
panel JSM110A, for intra-office applications only.
10/100BaseT backplane ethernet cable installation
3-16).
for pin out assignments.
IN IN
OUT
OUT
Figure 3-5,
Table 3-13, "10/100BaseT
3 - 3 3