Lnw66 And Lnw74 (10/100T) Tx Ethernet Cabling Testing - Alcatel-Lucent 1665 Installation Manual

Installation tests
............................................................................................................................................................................................................................................................
Tributary @ DSX-3
42*
43*
44*
45*
46*
47*
48*
Note:
........................................................................................................................................................................................................................
6
Repeat this procedure for each Function unit slot cabled to a DSX-3 via DS3/EC1 cabling.
........................................................................................................................................................................................................................
7
Verify there are no existing DS3 cross-connections. Use the View > Cross-Connections
command.
........................................................................................................................................................................................................................
8
Select Configuration > Update System... > Update All.
Result:
from the DSX-3.
........................................................................................................................................................................................................................
9
Check off the appropriate box in
E O
N D
........................................................................................................................................................

LNW66 and LNW74 (10/100T) TX ethernet cabling testing

Description
This procedure is used to test the ethernet 10/100 TX cabling from the function groups to
the RJ45 patch panel.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
Cross-Connection
m1-1-42,a1-42
m1-1-43,a1-43
m1-1-44,a1-44
m1-1-45,a1-45
m1-1-46,a1-46
m1-1-47,a1-47
m1-1-48,a1-48
Tribs 13-48 (denoted *) are for LNW19/LNW19B and LNW20 circuit packs only.
This command will remove alarms generated by removing the test signals
S
F T E P S
LNW66 and LNW74 (10/100T) TX ethernet cabling testing
Table I-3, Installation acceptance checklist.
6 - 2 9