Part Iii: Network Turn-Up And Testing - Alcatel-Lucent 1665 Installation Manual

Part III: Network turn-up and
testing
Overview
Purpose
This section starts the process of integrating the Alcatel-Lucent 1665 Data Multiplexer
(Alcatel-Lucent 1665 DMX) into the customer's network. The section provides the
procedures to connect inter-office fibers and verify DCC communications and path
switching. The section is broken down into two areas, Ring (UPSR/BLSR) setup and
WDMX. If the network is engineered as a ring, proceed to Chapter 6, there is no need to
procedure to the WDMX chapter. If the network consists of a ring integrated into the
WDMX application, then proceed to
(p. 9-1).
Contents
This section is organized into the following chapters:
Chapter 8, "OC-3/12/48 ring setup and testing: integration procedures"
Chapter 9, "WDMX setup and testing: integration procedures"
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
"WDMX setup and testing: integration procedures"
II I- 1