............................................................................................................................................................................................................................................................

Figure E-5 Latch type 4, 5, 6, 7 and 8 (opened and closed)

With your left hand, hold the pluggable transmission module by the dust plug (optical) or

port end (electrical). The ports are in your left hand and the gold fingers are visible (facing

you). (Do not insert pluggable transmission module.)

Rotate the module; the dust plug or port end is facing you and the gold fingers are pointing

away from you and are facing to the right. (Do not insert pluggable transmission module.)

Insert the pluggable transmission module in the required socket of the circuit pack

faceplate. Confirm that the pluggable transmission module is locked in the socket. Verify

that all unused sockets on the circuit pack are equipped with dust covers.

Alcatel-Lucent 1665 DMX R9.0

365-372-304R9.0 Issue 2

July 2010

Swivel Latch

Closed Position

(to the left)

Swivel Latch

Open Position

(to the right)

Install pluggable transmission modules

MA-DMX-424

E - 7

Table of Contents

Latch Type 4, 5, 6, 7 And 8 (Opened And Closed - Alcatel-Lucent 1665 Installation Manual

Related Manuals for Alcatel-Lucent 1665

Related Content for Alcatel-Lucent 1665

Table of Contents