............................................................................................................................................................................................................................................................

Figure B-5 LC-Type fiber connector

The LC-type fiber connector is assembled onto an LC-type connector port of a circuit pack

or LC-type LBO by aligning the alignment key with the slot in the connector port and

pushing the connector into the port until it snaps into place.

The LC-type fiber connector is removed from a connector port by depressing the snap-

action lever to disengage the fiber connector.

Figure B-6 LC-type fiber connection

Alcatel-Lucent 1665 DMX R9.0

365-372-304R9.0 Issue 2

July 2010

ALIGNMENT KEY

SNAP-ACTION TAB