Alcatel-Lucent 1665 Installation Manual page 241

Installation tests
............................................................................................................................................................................................................................................................
Ethernet port wiring verification testing
Note:
complete for LNW74 packs!
........................................................................................................................................................................................................................
1
If not still connected serially from the last procedure then, connect the Front CIT cable
between the PC and the CIT/RS-232 jack of System Controller and login to the shelf using
the serial connection.
........................................................................................................................................................................................................................
2
Select Configuration > Data > Create Virtual Switch.
........................................................................................................................................................................................................................
3
Choose the LNW66 that is being tested.
........................................................................................................................................................................................................................
4
Click Select.
........................................................................................................................................................................................................................
5
Enter Virtual Switch ID: 1.
........................................................................................................................................................................................................................
6
Under Ethernet (LAN) Ports, click Select All.
........................................................................................................................................................................................................................
7
Click Apply.
........................................................................................................................................................................................................................
8
Click Close.
........................................................................................................................................................................................................................
9
Select Configuration > Data > Create VLAN.
........................................................................................................................................................................................................................
10
Choose the CP fn circuit pack that applies.
........................................................................................................................................................................................................................
11
Click Select.
........................................................................................................................................................................................................................
12
Enter VLAN ID:100.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
Continue with the following section only for LNW66 circuit packs. Testing is
LNW66 and LNW74 (10/100T) TX ethernet cabling testing
6 - 3 1