Alcatel-Lucent 1665 Installation Manual page 199

Software download and circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
4
Click
OK
........................................................................................................................................................................................................................
5
Under
........................................................................................................................................................................................................................
6
Under
........................................................................................................................................................................................................................
7
Under Connection Type, click on the drop-down menu arrow and choose Serial, OSI, or
TCP/IP depending on the type of connection you are using.
Note:
SYSCTL (LNW2) displays the boot code on initial turn up and the 7.1 bootcode is
indicated by a flashing M P 7 1 in the display. When the bootcode is 7.1 or higher, the
SYSCTL has a default IP address of 169.254.1.1. If the PC's LAN card to is
configured as DHCP, the SYSCTL will provide the PC with an IP address within a
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
to connect. The screen appears:
, enter
NE Name LT-DMX
, select DMX from the drop-down list.
NE Type
TCP/IP is available when the SYSCTL has a bootcode of 7.1 or higher. The
.
®
Use of WaveStar CIT software
5 - 9