Alcatel-Lucent 1665 Dmx Shelf Initialization; Provision/Enable/Disable Tcp/Ip On An Iao Lan Port - Alcatel-Lucent 1665 Installation Manual

Software download and circuit pack installation
............................................................................................................................................................................................................................................................

Alcatel-Lucent 1665 DMX shelf initialization

Description
This section provides instructions for initializing the Alcatel-Lucent 1665 DMX shelf, to
insure that all circuit pack databases are correct for the current shelf and software release.
The procedures in this section assume that the SYSCTL is installed and software has been
successfully downloaded and the circuit packs have all been installed in the shelf as
described in the preceding sections.
Steps
........................................................................................................................................................................................................................
1
Log on to the Alcatel-Lucent 1665 DMX shelf using the CIT software as described in the
"Use of WaveStar
........................................................................................................................................................................................................................
2
Select Fault > Reset > Initialize System...
........................................................................................................................................................................................................................
3
Click OK and then Yes to the Warning.
Result:
........................................................................................................................................................................................................................
4
Check off the appropriate box in
E O
N D
........................................................................................................................................................

Provision/enable/disable TCP/IP on an IAO LAN port

Description
This is an optional task which describes the steps necessary to provision, enable or disable
the TCP/IP on the IAO LAN Port.
Before you begin
Prior to performing this task, you must:
Obtain the work instructions for this task.
•
Know which LAN Port is being provisioned.
•
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
®
CIT software" (p.
After a few minutes the shelf will reset and end the CIT session.
S
F T E P S
Alcatel-Lucent 1665 DMX shelf initialization
5-6).
Table I-3, Installation acceptance checklist.
5 - 1 3