Alcatel-Lucent 1665 Installation Manual page 175

Powering and initial circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
4
Remove the second OLIU from the packing material.
........................................................................................................................................................................................................................
5
Identify the M2 slot on the Alcatel-Lucent 1665 DMX high-capacity shelf. See
"Alcatel-Lucent 1665 DMX high-capacity shelf" (p.
........................................................................................................................................................................................................................
6
Place the second OLIU circuit pack into the M2 slot on the Alcatel-Lucent 1665 DMX
high-capacity shelf. Do NOT engage the circuit pack in the backplane connector.
Important!
to provide proper air flow for cooling. Always use Main-1 (M1) for shelves equipped with
only one main pack.
........................................................................................................................................................................................................................
7
Check off the appropriate box in
E O
N D
........................................................................................................................................................
LNW80 main switch pack installation
Follow this procedure to install the LNW80 circuit packs in the Alcatel-Lucent 1665
DMX high-capacity shelf.
........................................................................................................................................................................................................................
1
Remove the first LNW80 circuit pack from the packing material.
........................................................................................................................................................................................................................
2
Identify the M1 slot on the Alcatel-Lucent 1665 DMX high-capacity shelf. See
"Alcatel-Lucent 1665 DMX high-capacity shelf" (p.
........................................................................................................................................................................................................................
3
Place the LNW80 circuit pack into the M1 slot on the Alcatel-Lucent 1665 DMX high-
capacity shelf. Do NOT engage the circuit pack in the backplane connector.
........................................................................................................................................................................................................................
4
Remove the second LNW80 from the packing material.
........................................................................................................................................................................................................................
5
Identify the M2 slot on the Alcatel-Lucent 1665 DMX high-capacity shelf. See
"Alcatel-Lucent 1665 DMX high-capacity shelf" (p.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
If any of the Main slots are to remain unequipped, install a blank circuit pack
S
F T E P S
4-9).
Table I-3, Installation acceptance
4-9).
4-9).
Initial circuit pack installation
Figure 4-2,
checklist.
Figure 4-2,
Figure 4-2,
4 - 1 5