Alcatel-Lucent 1665 Installation Manual page 266

Installation tests
............................................................................................................................................................................................................................................................
OCN card FN-2, and that there is a LOS alarm issued against the current Standby OCN
card FN-1. Retrieving the alarms can be accomplished by selecting the Alarm List button
on the top right of the GUI.
Note:
switch, but should clear and show good transmission.
........................................................................................................................................................................................................................
11
Return the Test Set TX Cable to normal operation and ensure that the LOS alarm clears.
........................................................................................................................................................................................................................
12
Delete any cross-connects through the GUI Cross-Connection Wizard.
........................................................................................................................................................................................................................
13
Select Configuration > Update System... > Update All.
........................................................................................................................................................................................................................
14
Repeat this test on all OCN ports for all optical packs which will reside in the shelf.
........................................................................................................................................................................................................................
15
Check off the appropriate box in
E O
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
6 - 5 6
The test set will indicate that there was a transmission hit indicating the
S
F T E P S
Table I-3, Installation acceptance
Additional optical tests (optional)
checklist.
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010