Alcatel-Lucent 1665 Installation Manual page 317

WDMX setup and testing: integration procedures
........................................................................................................................................................................
................................................................................................................................................
1
Determine the direction of the Span, Main 1 or Main 2.
................................................................................................................................................
2
Install an OC-192 PTM in the assigned port slot in the Main circuit pack see
"Channel/port assignments" (p.
Note:
X10G52C5 through X10G55C5.
................................................................................................................................................
3
Login to the Alcatel-Lucent 1665 DMX using the WaveStar
................................................................................................................................................
4
Provision the PTM/OTU-2
Select Configuration > Equipment from the System View
................................................................................................................................................
5
Click the "+" next to Main 1 circuit pack to expand the list.
................................................................................................................................................
6
Highlight the PTM and click Select.
................................................................................................................................................
7
Enter the Frequency in the Expected Frequency and click Apply, then Close.
Note:
column in
................................................................................................................................................
8
Create OCH Cross-connections
Select Configuration > OCH Cross-connections from the System View
................................................................................................................................................
9
Select the Create a new OCH cross-connection radio button in the OCH Cross-
Connection Wizard. Click Next.
................................................................................................................................................
10
Click the 2-way Add/Drop radio button from the cross-connection list. Click Next.
........................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
9-17).
Only the first 4 wavelengths can be used in the LNW59 and LNW502, PTMs
The frequency is determined by the PTM inserted in Port 9. See the LNW705
Table 9-1, "Channel/port assignments" (p. 9-17)
Connecting the ring (Mains) to the WDMX
Table 9-1,
®
CIT.
for acceptable values.
9 - 1 3