Alcatel-Lucent 1665 Installation Manual page 187

Powering and initial circuit pack installation
............................................................................................................................................................................................................................................................
177D/LNW98 blank CP installation (optional)
Follow this procedure to install 177D Apparatus Blank(s) or LNW98 Detectable Blank(s)
into the Alcatel-Lucent 1665 DMX high-capacity shelf.
Note:
unequipped slots to provide proper air flow for cooling.
........................................................................................................................................................................................................................
1
Identify all the unequipped Function unit or Growth slots.
........................................................................................................................................................................................................................
2
Remove the 177D or LNW98 from the packing material.
........................................................................................................................................................................................................................
3
Insert (fully seat) the 177D or LNW98 blank into an unequipped slot on the shelf.
........................................................................................................................................................................................................................
4
Continue with the next unequipped slot until all the unused slots are equipped with an
177D Apparatus Blank or LNW98 Detectable Blank.
........................................................................................................................................................................................................................
5
Check off the appropriate box in
E O
N D
........................................................................................................................................................
177E/LNW97 blank CP installation (optional)
Follow this procedure to install 177E Apparatus Blank(s) or LNW97 Detectable Blank(s)
into the Alcatel-Lucent 1665 DMX high-capacity shelf.
Note:
Main-2 (M2) slot to provide proper air flow for cooling when only one main is
equipped. Always use Main-1 (M1) for shelves equipped with only one main pack.
........................................................................................................................................................................................................................
1
Identify any unequipped Main slots.
........................................................................................................................................................................................................................
2
Remove the 177E or LNW97 from the packing material.
........................................................................................................................................................................................................................
3
Insert (fully seat) the 177E or LNW97 into the unequipped Main slot on the shelf.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
A 177D Apparatus Blank or LNW98 Detectable Blank is required in any
S
F T E P S
A 177E Apparatus Blank or LNW97 Detectable Blank is required in the
Table I-3, Installation acceptance
Initial circuit pack installation
checklist.
4 - 2 7