Alcatel-Lucent 1665 Installation Manual page 159

Cable and fiber installation
............................................................................................................................................................................................................................................................
Table 3-27 Standard CIT cable connections
Connection
Front CIT cable
Notes:
1. The connection and the colors shown above are for a standard Alcatel-Lucent made
Table 3-28 RJ-45 to DB-9 connector connections
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
RJ45 connector
Pin#
1
3
4
5
6
cable. If you use a RJ-45 to DB-9 connector with a standard straight-through
10BaseT LAN cable, see
(p. 3-69).
From RJ45
connector
Pin#
1
3
4
5
6
Notes:
1. The connection and the colors shown above are for RJ-45 to
DB-9 connector.
2. This connector should be used with a standard straight-through
cable which has all eight wires connected.
Designation Color
FRS232N W - O
FDTR W - BL
Ground W - G
FTXD O
FRXD G
Table 3-28, "RJ-45 to DB-9 connector connections"
Color
Blue
Black
Red
Green
Yellow
CIT cable installation
9-Pin D-type connector
Pin# Designation
6 DCE Ready
4 DTE Ready
5 Ground
2 Receive Data
3 Transmit Data
To 9-pin D-type
connector
Pin#
6
4
5
2
3
3 - 6 9