Alcatel-Lucent 1665 Installation Manual page 57

Physical installation and powering
I
............................................................................................................................................................................................................................................................
Section and Chapter
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
Procedure
Local equipment and cross-connect tests (p. 6-
6)
Local equipment and cross-connect tests (p. 6-6)
DS1 terminating equipment loopback testing
(p. 6-6)
DS1 non-terminating equipment transmission
testing (optical main OLIU) (p. 6-8)
DS1 non-terminating equipment transmission
testing (LNW80 switch or LNW59 without
optics) (p. 6-9)
DS1 protection switching (p. 6-10)
DS1 function unit protection switching test
(manual) (p. 6-10)
DS1 function unit protection switching test
(command) (p. 6-12)
DS1 path switching test (manual) (p. 6-13)
DS1 cleanup procedures (p. 6-14)
Delete any existing DS1 cross-connections (p.
6-14)
Verify cross-connects removed (p. 6-17)
DS3/EC1 and TMUX testing procedure (p. 6-17)
Verify provisioning (p. 6-18)
DS3 terminating equipment loopback testing
(optical main OLIUs) (p. 6-18)
DS3 non-terminating transmission (optical
main OLIU) (p. 6-22)
"DS3 protection switching" (p. 6-23)
DS3 function unit protection switching test
(manual) (p. 6-23)
DS3 function unit protection switching test
(command) (p. 6-24)
DS3 path switching test (command) (p. 6-25)
Overview
Completed
Required Yes No
Yes
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
I- 1 1