Ds3/Ec1 And Tmux Testing Procedure - Alcatel-Lucent 1665 Installation Manual

Installation tests
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
7
Check off the appropriate box in
E O
N D
........................................................................................................................................................
Verify cross-connects removed
........................................................................................................................................................................................................................
1
Select View > Cross-Connections...
........................................................................................................................................................................................................................
2
Choose shelf (Alcatel-Lucent 1665 DMX) and click Select.
........................................................................................................................................................................................................................
3
Verify that there are no cross-connections on the shelf.
........................................................................................................................................................................................................................
4
Select Configuration > Update System > Update All.
Result:
from the DSX-1.
........................................................................................................................................................................................................................
5
Check off the appropriate box in
E O
N D
........................................................................................................................................................

DS3/EC1 and TMUX testing procedure

Description
Perform the following steps for all Alcatel-Lucent 1665 DMX shelf Function unit slots
containing 12DS3/EC1 (LNW16), 48DS3/EC1 (LNW19/LNW19B), 12TMUX (LNW18)
and 48TMUX (LNW20) circuit packs and cabled to a DSX-3 via DS3/EC1 cabling. The
48DS3/EC1 and 48TMUX circuit packs can only be used with high capacity shelves.
If the Alcatel-Lucent 1665 DMX is cabled to some other type of DS3/EC1 terminating
equipment, use this procedure by substituting these ports for the DSX-3 ports called out in
the procedure. If the Alcatel-Lucent 1665 DMX shelf is not fully populated, it may be
necessary to move the circuit pack(s) from slot to slot in order to test all DS3/EC1 and
TMUX cabling.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
S
F T E P S
This command will remove alarms generated by removing the test signals
S
F T E P S
Table I-3, Installation acceptance
Table I-3, Installation acceptance
DS3/EC1 and TMUX testing procedure
checklist.
checklist.
6 - 1 7