Alcatel-Lucent 1665 Installation Manual page 177

Powering and initial circuit pack installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
5
Check off the appropriate box in
E O
N D
........................................................................................................................................................
LNW705 XM10G/8 muxponder pack
Follow this procedure to install the LNW705 circuit packs in the Alcatel-Lucent 1665
DMX high-capacity shelf. The LNW705 XM10G/8 circuit pack
multiplexes/demultiplexes up to 8 ports onto a single 10G wavelength. The LNW705
XM10G/8 circuit pack provides transport for the following types of signals:
OC-3/12/48, 1GE, FC, FICON and 2XFC
Note:
with LNW55 OC3/OC12/OC48, LNW82 OC3/OC12/OC48, LNW504 OC-48/OC-
192, LNW785 OMD, and/or LNW705 XM10G/8 circuit packs. This shelf cover
provides more space to prevent fibers from touching the front cover when the cover is
closed.
Note:
This procedure will consist of two parts. Installing the circuit card and installing the
PTM per
transmission modules (PTM) (p.
........................................................................................................................................................................................................................
1
See the engineering job specification. Identify the proper function group slots where
LNW705 circuit packs will be installed.
........................................................................................................................................................................................................................
2
Remove the first LNW705 circuit pack from the packing material.
........................................................................................................................................................................................................................
3
Place the circuit pack into the shelf (slot A1, A2, B1, B2, C1, C2, D1, D2, G1, or G2 as
required). Do NOT engage the circuit pack in the backplane connector.
........................................................................................................................................................................................................................
4
Repeat
........................................................................................................................................................................................................................
5
See Appendix
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
S
F T E P S
A deeper shelf cover (comcode 849068358) is required for shelves equipped
The LNW705 circuit packs require PTM modules for the optical interface.
Appendix E, "Pluggable transmission module
Step 1 through Step 3
E, Pluggable transmission modules (PTM) (p.
Table I-3, Installation acceptance
E-1).
for each additional LNW705 to be equipped.
Initial circuit pack installation
checklist.
installation", Pluggable
E-1).
4 - 1 7