Alcatel-Lucent 1665 Installation Manual page 204

Data multiplexer
Hide thumbs Also See for 1665:
Table of Contents

Advertisement

Software download and circuit pack installation
............................................................................................................................................................................................................................................................
Obtain the IP Address and IP Subnet Mask of the desired LAN Port and the IP Default
Router Address if you are connecting to a router.
Be able to log in to a Alcatel-Lucent 1665 DMX with the WaveStar
familiar with the functions of the WaveStar
Steps
........................................................................................................................................................................................................................
1
Use the WaveStar
using a Graphical connection.
........................................................................................................................................................................................................................
2
Determine which IAO LAN Port(s) you want to use (front or rear).
Note:
the front IAO LAN port, use lan-1 as the AID.
........................................................................................................................................................................................................................
3
From the System View menu, select
Administration > Data Communications
Result:
........................................................................................................................................................................................................................
4
In the Data Communications window, click on the TCP/IP tab at the top of the window.
Result:
........................................................................................................................................................................................................................
5
Select and/or modify the following parameters:
1. Select the Port Aid: (lan-1 [front] or lan-2 [rear]) being provisioned.
Note:
function from LAN-1 unless the engineering specification calls for it. If the OSI
function is disabled, the only access to the shelf may be through the Serial Port.
2. If applicable, one at time, click the Modify button to set the IP Address and IP
Subnet Mask of the desired LAN port and the IP Default Router Address, if
connecting to a default router.
When the provisioning window opens for the IP address being provisioned, enter the
IP address as four dot-separated decimal numbers ranging from 0 to 255. Click OK to
make your changes or Cancel to quit.
............................................................................................................................................................................................................................................................
5 - 1 4
®
CIT to log in to the Alcatel-Lucent 1665 DMX shelf being provisioned
If you are using the rear IAO LAN port, use lan-2 as the AID. If you are using
The Data Communications window opens
The TCP/IP parameters are displayed.
When provisioning TCP/IP on the Network Element, do not disable the OSI
Provision/enable/disable TCP/IP on an IAO LAN port
®
CIT.
Alcatel-Lucent 1665 DMX R9.0
®
CIT and be
365-372-304R9.0 Issue 2
July 2010

Advertisement

Table of Contents
loading

Table of Contents