Danfoss VACON NX All-in-One Application Manual page 6

VACON® NX All-in-One
Application Guide
8.2 Control I/O in Pump and Fan Control Application
8.3 Control Signal Logic in Pump and Fan Control Application
8.4 Parameter Lists for Pump and Fan Control Application
8.4.1 Monitoring Values (Control Panel: Menu M1)
8.4.2 Basic Parameters (Control Panel: Menu M2 -> G2.1)
8.4.3 Input Signals
8.4.4 Output Signals
8.4.5 Drive Control Parameters (Control Panel: Menu M2 -> G2.4)
8.4.6 Prohibit Frequency Parameters (Control Panel: Menu M2 -> G2.5)
8.4.7 Motor Control Parameters (Control Panel: Menu M2 ->G2.6)
8.4.8 Protections (Control Panel: Menu M2 -> G2.7)
8.4.9 Auto Restart Parameters (Control Panel: Menu M2 -> G2.8)
8.4.10 Pump and Fan Control Parameters (Control Panel: Menu M2 -> G2.9)
8.4.11 Keypad Control (Control Panel: Menu M3)
8.4.12 System Menu (Control Panel: Menu M6)
8.4.13 Expander Boards (Control Panel: Menu M7)
9 Monitoring Value Descriptions
10 Parameter Descriptions
10.618 Keypad Control Parameters
10.619 Master/Follower Function
10.620 External Brake Control with Additional Limits (IDs 315, 316, 346-349, 352, 353)
10.621 Parameters of Motor Thermal Protection (IDs 704-708)
10.622 Parameters of Stall Protection (IDs 709-712)
10.623 Parameters of Underload Protection (IDs 713-716)
10.624 Fieldbus Control Parameters (IDs 850-859)
10.624.1 Process Data Out (Slave -> Master)
10.624.2 Current Scaling in Different Size of Units
10.624.3 Process Data in (Master -> Slave)
10.625 Closed Loop Parameters (IDs 612-621)
10.626 "Terminal to Function" (TTF) Programming Principle
10.626.1 Defining an Input/Output for a Certain Function on Keypad
10.626.2 Defining a Terminal for a Certain Function with VACON® NCDrive
10.626.3 Defining Unused Inputs/Outputs
10.627 Speed Control Parameters (Multi-Purpose Control Application Only)
10.628 Functional Safety Parameters (Multi-Purpose Control Application Only)
10.629 Automatic Changing Between Drives (Pump and Fan Control Application Only)
10.630 Interlock Selection (Pump and Fan Control Application Only)
6 | Danfoss A/S © 2023.02
Contents
AB296635287482en-000301/DPD00903
129
132
132
132
134
135
139
143
144
144
145
147
148
149
150
150
151
167
305
306
306
308
309
309
309
309
309
310
311
311
312
313
313
313
315
316
317