Danfoss VACON NX All-in-One Application Manual page 153
Hide thumbs
Also See for VACON NX All-in-One:
- Installation manual (5 pages) ,
- Commissioning and maintenance manual (62 pages)
Table of Contents
Advertisement
VACON® NX All-in-One
Application Guide
•
V1.15 (Multi-Purpose Control Application, Pump and Fan Control Application)
•
V1.16 (Basic Application, Standard Application, Local/Remote Control Application, Multi-Step Speed Control Application)
•
V1.18 (PID Control Application)
This monitoring value shows the status of the analog output 1.
9.22 (ID 27) Analog Input 3
Location in the menu:
•
V1.13 (PID Control Application)
•
V1.16 (Multi-Purpose Control Application, Pump and Fan Control Application)
This monitoring value shows the status of the analog input 3.
9.23 (ID 28) Analog Input 4
Location in the menu:
•
V1.14 (PID Control Application)
•
V1.17 (Multi-Purpose Control Application, Pump and Fan Control Application)
This monitoring value shows the status of the analog input 4.
9.24 (ID 29) Actual Special Display
Location in the menu: V1.23 (PID Control Application, Pump and Fan Control Application)
This monitoring value shows the actual values of parameters for special display.
9.25 (ID 30) Running Auxiliary Drives
Location in the menu: V1.22 (Pump and Fan Control Application)
This monitoring value shows the actual number of auxiliary drives that operate in the system.
9.26 (ID 37) Fault History
Location in the menu:
•
V1.22.8 (Multi-Purpose Control Application)
•
V1.26.5 (Pump and Fan Control Application)
This monitoring value shows the fault code of latest activated fault that is not reset.
9.27 (ID 42) Sensor Max Temperature
Location in the menu:
•
V1.19 (Multi-Purpose Control Application)
•
V1.24 (PID Control Application, Pump and Fan Control Application)
This monitoring value shows the maximum temperature of the sensor.
9.28 (ID 43) Drive Status Word
Location in the menu:
•
V1.21.4 (Multi-Purpose Control Application)
•
V1.26.4 (PID Control Application, Pump and Fan Control Application)
This monitoring value shows the bit-coded status of the drive.
9.29 (ID 44) DC Voltage
Location in the menu:
•
V1.21.3 (Multi-Purpose Control Application)
•
V1.26.3 (PID Control Application, Pump and Fan Control Application)
This monitoring value shows the unfiltered DC-voltage.
Danfoss A/S © 2023.02
Monitoring Value Descriptions
AB296635287482en-000301 / DPD00903 | 153
Advertisement
Table of Contents
Need help?
Do you have a question about the VACON NX All-in-One and is the answer not in the manual?