Control Signal Logic In Basic Application; Parameter Lists For Basic Application; Monitoring Values (Control Panel: Menu M1) - Danfoss VACON NX All-in-One Application Manual

VACON® NX All-in-One
Application Guide
Jumper block X3:
CMA and CMB grounding
CMB connected to GND
CMA connected to GND
CMB isolated from GND
CMA isolated from GND
CMB and CMA internally
connected together,isolated
from GND
= Factory default
Illustration 3: Jumper Selections

2.3 Control Signal Logic in Basic Application

DIN4
DIN5
AI1
AI2
Reference from fieldbus
Start/Stop from fieldbus
Direction from fieldbus
Start forward
DIN1
DIN2
Start reverse
Fault reset input
DIN6
External fault input (programmable)
DIN3
Illustration 4: Control Signal Logic of the Basic Application

2.4 Parameter Lists for Basic Application

2.4.1 Monitoring Values (Control Panel: Menu M1)

The monitoring values are the actual values of parameters and signals as well as statuses and measurements. Monitoring values
cannot be edited.
12 | Danfoss A/S © 2023.02
3.2 Keypad reference
2.2 Max Frequency
Start/Stop buttons
Start/Stop and
reverse logic
3.3 Keypad direction
2.14 I/O Reference
2.18 Preset Speed 1
2.19 Preset Speed 2
3.1 Control place
Internal frequency
reference
Reset button
Start/Stop
Internal Start/Stop
Reverse
Internal reverse
≥ 1
Basic Application
Internal fault reset
AB296635287482en-000301 / DPD00903