Output Signals (Control Panel: Menu M2 -> G2.3) - Danfoss VACON NX All-in-One Application Manual

VACON® NX All-in-One
Application Guide
5.4.4 Output Signals (Control Panel: Menu M2 -> G2.3)
Table 28: Output Signals, G2.3
Index Parameter
P2.3.1
(1)
Analog output 1 signal selec-
tion
P2.3.2 Analog output function
P2.3.3 Analog output filter time
P2.3.4 Analog output inversion
P2.3.5 Analog output minimum
P2.3.6 Analog output scale
P2.3.7 Digital output 1 function
P2.3.8 RO1 function
P2.3.9 RO2 function
52 | Danfoss A/S © 2023.02
Min Max Unit Default
-
0.1 E.10 A.1
-
0 8 1
0.00 10.00 s 1.00
-
0 1 0
-
0 1 0
10 1000 % 100
-
0 22 1
-
0 22 2
-
0 22 3
Multi-step Speed Control
ID Description
-
464
307 0 = Not used (20 mA/10 V)
1 = Output freq. (0–f
max
2 = Freq. reference (0–f
3 = Motor speed (0–Motor nominal speed)
4 = Motor current (0–I
nMotor
5 = Motor torque (0–T
6 = Motor power (0–P
nMotor
7 = Motor voltage (0–U
8 = DC-link volt (0–1000 V)
308 0 = No filtering
309 0 = Not inverted
1 = Inverted
310 0 = 0 mA (0 V)
1 = 4 mA (2 V)
-
311
312 0 = Not used
1 = Ready
313
2 = Run
3 = Fault
314
4 = Fault inverted
5 = AC drive overheat warning
6 = Ext. fault or warning
7 = Ref. fault or warning
8 = Warning
9 = Reversed
10 = Jogging speed selected
11 = At speed
12 = Mot. regulator active
13 = OP freq. limit superv. 1
14 = OP freq. limit superv.2
15 = Torque limit superv.
16 = Ref. limit superv.
17 = Ext. brake control
18 = Control place: I/O
19 = AC drive temp. limit superv.
20 = Unrequested rotation direction
21 = Ext. brake control inverted
22 = Thermistor fault/warn.
AB296635287482en-000301 / DPD00903
Application
)
)
max
)
)
nMotor
)
)
nMotor