Drive Control Parameters (Control Panel: Menu M2 -> G2.4) - Danfoss VACON NX All-in-One Application Manual

VACON® NX All-in-One
Application Guide
Index Parameter
P2.3.6.5 Analog output 2 minimum
P2.3.6.6 Analog output 2 scale
P2.3.6.7 Analog output 2 offset
Use the Terminal to Function method (TTF) with these parameters, see
1
Table 102: Analog Output 3 (Control Panel: Menu M2 -> G2.3.7)
Index Parameter
P2.3.5.1
(1)
Analog output 3 signal selection
P2.3.5.2
Analog output 3 function
P2.3.5.3
Analog output 3 filter time
P2.3.5.4
Analog output 3 inversion
P2.3.5.5 Analog output 3 minimum
P2.3.5.6 Analog output 3 scale
P2.3.5.7 Analog output 3 offset
Use the Terminal to Function method (TTF) with these parameters, see
1
8.4.5 Drive Control Parameters (Control Panel: Menu M2 -> G2.4)
Table 103: Drive Control Parameters, G2.4
Index Parameter
P2.4.1 Ramp 1 shape
P2.4.2 Ramp 2 shape
P2.4.3 Acceleration time 2
P2.4.4 Deceleration time 2
P2.4.5
Brake chopper
Danfoss A/S © 2023.02
Min Max Unit
-
0 1
10 1000 %
-100.00 100.00 %
10.626 "Terminal to Function" (TTF) Programming
Min Max Unit
-
0.1 E.10
-
0 14
0.00 10.00 s
-
0 1
-
0 1
10 1000 %
-100.00 100.00 %
10.626 "Terminal to Function" (TTF) Programming
Min Max Unit Default
0.0 10.0 s 0.1
0.0 10.0 s 0.0
0.1 3000.0 s 1.0
0.1 3000.0 s 1.0
-
0 4 0
Pump and Fan Control Application
Default ID Description
1 = Inverted
0 475 0 = 0 mA (0 V)
1 = 4 mA (2 V)
-
100 476
-
0.00 477
Principle.
Default ID Description
-
0.1 478
4 479 See P2.3.3.2
1.00 480 0 = No filtering
0 481 0 = Not inverted
1 = Inverted
0 482 0 = 0 mA (0 V)
1 = 4 mA (2 V)
-
100 483
-
0.00 484
Principle.
ID Description
500 0 = Linear
100 = full acc/dec inc/dec tmes
501 0 = Linear
100 = full acc/dec inc/dec tmes
-
502
-
503
504 0 = Disabled
1 = Used when running
2 = External brake chopper
3 = Used when stopped/running
AB296635287482en-000301 / DPD00903 | 143