Drive Control Parameters (Control Panel: Menu M2->G2.4) - Danfoss VACON NX All-in-One Application Manual

VACON® NX All-in-One
Application Guide
Index Parameter
P2.3.21 Frequency converter tempera-
ture limit value
P2.3.22 Analog output 2 scaling
P2.3.23 Analog output 2 function
P2.3.24 Analog output 2 filter time
P2.3.25 Analog output 2 inversion
P2.3.26 Analog output 2 minimum
P2.3.27 Analog output 2 scaling
Use the Terminal to Function method (TTF) with these parameters, see
1
4.4.5 Drive Control Parameters (Control Panel: Menu M2->G2.4)
Table 19: Drive Control Parameters, G2.4
Index Parameter
P2.4.1 Ramp 1 shape
P2.4.2 Ramp 2 shape
P2.4.3 Acceleration time 2
P2.4.4 Deceleration time 2
P2.4.5 Brake chopper
P2.4.6 Start function
P2.4.7 Stop function
Danfoss A/S © 2023.02
Min Max Unit Default
-10 100 °C 40
-
0.1 E.10 0.1
-
0 8 4
0.00 10.00 s 1.00
-
0 1 0
-
0 1 0
10 1000 % 1.00
10.626 "Terminal to Function" (TTF) Programming
Min Max Unit
0.0 10.0 s
0.0 10.0 s
0.1 3000.0 s
0.1 3000.0 s
-
0 4
-
0 2
-
0 3
Local/Remote Control Application
ID Description
2 = High limit
-
355
-
471
472 As parameter 2.3.2
473 0 = No filtering
474 0 = Not inverted
1 = Inverted
475 0 = 0 mA (0 V)
1 = 4 mA (2 V)
-
476
Default ID Description
0.1 500 0 = Linear
100 = full acc/dec inc/dec tmes
0.0 501 0 = Linear
100 = full acc/dec inc/dec tmes
-
1.0 502
-
1.0 503
0 504 0 = Disabled
1 = Used when running
2 = External brake chopper
3 = Used when stopped/running
4 = Used when running (no testing)
0 505 0 = Ramp
1 = Flying start
2 = Conditional flying start
0 506 0 = Coasting
1 = Ramp
2 = Ramp+Run enable coast
3 = Coast+Run enable ramp
AB296635287482en-000301 / DPD00903 | 39
Principle.