Basic Application; Introduction To Basic Application; Motor Protection Functions In The Basic Application - Danfoss VACON NX All-in-One Application Manual

VACON® NX All-in-One
Application Guide

2 Basic Application

2.1 Introduction to Basic Application

The Basic Application is a simple and easy-to-use application. It is the default setting on delivery from the factory. Otherwise select
the Basic Application in menu M6 on page S6.2. See the User Manual of the product.
Digital input DIN 3 is programmable.
The parameters of the Basic Application are explained in Chapter Parameter descriptions of this manual. The explanations are ar-
ranged according to the individual ID number of the parameter.

2.1.1 Motor Protection Functions in the Basic Application

The Basic Application provides almost all the same protection functions as the other applications:
• External fault protection
• Input phase supervision
• Undervoltage protection
• Output phase supervision
• Earth fault protection
• Motor thermal protection
• Thermistor fault protection
• Fieldbus fault protection
• Slot fault protection
Unlike the other applications, the Basic Application does not provide any parameters for choosing the response function or limit
values for the faults. For more information on the motor thermal protection, see
10.621 Parameters of Motor Thermal Protection (IDs
10 | Danfoss A/S © 2023.02
10.336 (ID 704) Motor Thermal Protection
704–708).
Basic Application
and
AB296635287482en-000301 / DPD00903