Navigating Channel Properties, Plug-Ins, And Parameter Pages In The Control Area - Native Instruments MASCHINE MIKRO MK3 Manual

Click the desired tab to switch the display of the Control area.
►
Click the MASTER,
play the Plug-in parameters or Channel properties of the Master, the focused Group or the
focused Sound, respectively.
²
The selected tab lights up. The name of your Project, the focused Group or the focused
Sound appears under the MASTER, GROUP, and
the picture above), and the rest of the Control area displays the Plug-in parameters and
Channel properties of the Master, the focused Group or the focused Sound, respectively.
3.3.5

Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area

We describe here how to display/edit any Plug-in parameters or Channel properties located in
any Sound, Group or the Master.
To select a particular Plug-in or a particular set of Channel properties, you first need to display
the parameters of the Master, the desired Group or Sound.
1. To display the parameters of a particular Group or Sound, put it in focus by clicking it in
the Group List or Sound List, respectively (see section
Sound).
2. In the top left corner of the Control area, click the MASTER,
display the parameters of the Master, the focused Group or the focused Sound, respec-
tively.
² The Control area now displays the Plug-in parameters and Channel properties of the de-
sired Sound, desired Group or the Master.
GROUP or SOUND tab in the top left corner of the Control area to dis-
SOUND tabs (the Muddy Matt
±3.3.3, Focusing on a Group or a
GROUP or
MASCHINE MIKRO - Manual - 78
Basic Concepts
Common Operations
Sound in
SOUND tab to