Tom - Floor - Native Instruments MASCHINE MIKRO MK3 Manual

Element
SCALE Section
Velocity
9.5.3 Tom 3 Floor
The Floor Tom is an acoustic tom that provides the emulation of a complete set of toms. Al-
though it is more suitable for floor and low toms, it is also capable of producing interesting
mid and high toms. Furthermore the control over the pitch bend and the mute parameters al-
low for a wide range of sounds.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
±13.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Description
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
for more information on this.
Description
Selects the engine used in the Tom Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 48.00 to
62.00. The default value is 48.00. For more details see
Pitch Range, Tuning, and MIDI
±9.5, The
Toms.
Notes.
MASCHINE MIKRO - Manual - 379
Using the Drumsynths
The Toms
±9.1.5,