Kick - Sub - Native Instruments MASCHINE MIKRO MK3 Manual

▪ Bold: ±9.2.7, Kick 3
▪ Maple: ±9.2.8, Kick 3
▪ Push: ±9.2.9, Kick 3
For more information on engines, see
general information on the Kick and the other Drumsynths, see
dling.
9.2.1 Kick 3 Sub
The Sub engine is the default engine of the Kick.
Based on the kick from a classic analog drum machine, the Sub kick is a clean, subby, sine-
based kick drum which can be very effectively abused as a sub bass, tom or even a bleepy lead
if tuned up and played chromatically on the keyboard.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
±13.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Decay
Bold.
Maple.
Push.
±9.1.1, Engines: Many Different Drums per
for more information on this.
Description
Selects the engine used in the Kick Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 31.00 to
55.00. The default value is 43.00. For more details see
Pitch Range, Tuning, and MIDI
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
±9.1, Drumsynths 3 General Han-
±9.2, The
Kicks.
Notes.
MASCHINE MIKRO - Manual - 323
Using the Drumsynths
The Kicks
Drumsynth. For
±9.1.5,