Advanced Configuration; Advanced Configuration On Windows (Control Panel) - Native Instruments Komplete Audio 6 Manual

5

Advanced Configuration

Once you have installed the KOMPLETE AUDIO 6
set it up as your system's default audio output device
options available, such as latency optimization (see also
audio quality settings.
On Windows
All advanced configuration settings on Windows can be accessed from the Control Panel soft-
ware, which was installed on your computer during the software installation procedure in chap-
ter ↑2, Installing KOMPLETE AUDIO
tion on Windows (Control
If you experience problems with your setup, please refer to the Audio Troubleshooting
Guide, which you can access from the
nostics page, or open it directly from the software's documentation folder.
On Mac OS X
To access advanced configuration settings on Mac OS X, open the Mac OS X Audio MIDI Set-
up. Proceed with section
If you experience problems with your setup, please refer to the Audio Troubleshooting
Guide, which you can access directly from the software's documentation folder.
5.1

Advanced Configuration on Windows (Control Panel)

The Control Panel software allows you to change the driver's performance settings, monitor per-
formance and detect errors. To open the Control Panel:
Navigate to Start > All Programs > Native Instruments > KOMPLETE AUDIO 6 Driver >
►
Control Panel.
6. Proceed with subchapter
Panel).
Information
↑5.2, Advanced Configuration on Mac OS X (Audio MIDI
Advanced Configuration on Windows (Control Panel)
(↑2, Installing KOMPLETE AUDIO
(↑3, Basic Configuration), there are more
↑8.1, Technical Specifications) and
↑5.1, Advanced Configura-
section of the Control Panel's
KOMPLETE AUDIO 6 - Manual - 22
Advanced Configuration
6) and
Diag-
Setup).