Native Instruments MASCHINE MIKRO MK3 Manual page 516

3. Check that the IO
and display the input/output settings of each channel strip.
4. Above the fader area in the channel strip of the Sound or Group you want to configure,
click the bigger field on the right (labeled
port in the menu.
This is equivalent to setting the
If MASCHINE is running as a plug-in you see a
the MIDI input from the host.
This is equivalent to enabling the
button is active on the left of the Mixer 4 if not, click it to enable it
Source parameter described above.
Active button described above.
Audio Routing, Remote Control, and Macro Controls
MIDI IN by default) and select the desired MIDI
MIDI IN button instead. Click it to enable
Using MIDI Control and Host Automation
MASCHINE MIKRO - Manual - 516