Undo/Redo - Native Instruments MASCHINE MIKRO MK3 Manual

▪ To adjust the swing of a particular Group, hold its Group button (A3H) and turn the Encod-
er. Hold SHIFT to adjust the value in finer increments.
▪ To adjust the swing of an individual Sound, press and hold its pad and turn the Encoder.
Hold SHIFT to adjust the value in finer increments.
As you adjust the swing, the display indicates the current value.
Adjusting Tempo
►
Press the TEMPO
² The TEMPO button lights up. You can now adjust the tempo for your overall Project, for
each Group, and for each Sound individually using the Encoder:
▪ To adjust the overall tempo, turn the Encoder. Hold
crements.
As you adjust the tempo, the display indicates the current value.
It is recommended you try this while your Pattern is playing, you will immediately hear the effect of
your changes.
When you are done with your volume, swing, and tempo changes, press the lit VOLUME,
SWING, or TEMPO button to deactivate it.
3.3.2

Undo/Redo

Undoing and re-doing your last actions can be useful to cancel operations you have performed
or to compare two versions before and after a change. You can undo nearly everything you did
after loading or creating your Project.
Note: If you save your Project, you will no longer be able to undo or redo any actions performed be-
fore saving!
MASCHINE provides two different undo/redo features, each of them being suited for specific
situations:
▪ Step Undo allows you to cancel your last single action.
button next to the Encoder.
SHIFT to adjust the value in finer in-
MASCHINE MIKRO - Manual - 71
Basic Concepts
Common Operations